Rear Projection TV Standard Services
- White balance/gray scale tracking calibration to NTSC/ATSC D65 standard
using a color analyzer.
- Calibration of all user control presets using
SMPTE
standards-compliant NTSC video generator and color filters.
- Color decoder calibration to correct "red push" (when possible).
- Electronic focus of the red, green, and blue CRTs.
- Defeat Scan Velocity Modulation in service menu.
- Complete Pre/Post Calibration Report.
Rear Projection TV Standard Services - Contact for Quote
Extended Care Standard Service Package
- Initial calibration - Perform all Standard Services.
- 30 day followup - Satisfaction followup and check all calibrations for initial aging drift.
- Six month checkup - Check all calibrations for drift and retouch, as needed.
- One year recalibration - Recalibrate all parameters and document drift.
Extended Care Service Package - Contact for Quote
Advanced Services
- Delivery, installation, setup adjustments, and use directions.
- White balance/gray scale tracking calibration for additional scan
frequencies* or color temperature modes**.
- Picture geometry and convergence calibration for each scan rate and
aspect ratio used.
- Mechanical focus adjustment of the red, green, and blue projection lenses
(CRT-based projectors).
- Interior lining of Rear-Projection TV cabinets for control of internal
reflections.
- Removal of Rear-Projection TV protective screens (decreases glare and
increases light output).
- Lens striping of red and blue projection tubes to improve side-to-side
white uniformity.
- Scan Velocity Modulation circuit disconnection (when menu switch is
unavailable).
- Lens/Mirror cleaning.
Rear Projection TV Advanced Services -
available on an hourly package quote basis (varies with display
type)†