Two-Piece Projector (Front or Rear) Standard Services
- White balance/gray scale tracking calibration to NTSC/ATSC D65 standard
using a color analyzer.
- Calibration of all user control presets using
SMPTE
standards-compliant NTSC video generator and color filters.
- Color decoder calibration to correct "red push" (when possible).
- Electronic focus touch-up of the red, green, and blue CRTs (CRT-based
projectors).
- Mechanical focus adjustment of the red, green, and blue projection lenses
(CRT-based projectors).
- Picture geometry calibration (overscan, centering, linearity, raster
shape).
- Convergence touch-up of all aspect ratios (CRT-based projectors).
- Complete Pre/Post Calibration Report.
Two-Piece Projector Standard Services - Contact for Quote
Extended Care Standard Service Package
- Initial calibration - Perform all Standard Services.
- 30 day followup - Satisfaction followup and check all calibrations for initial aging drift.
- Six month checkup - Check all calibrations for drift and retouch, as needed.
- One year recalibration - Recalibrate all parameters and document drift.
Extended Care Service Package - Contact for Quote
Advanced Services
- Delivery, installation, setup adjustments, and use directions.
- White balance/gray scale tracking calibration for additional scan
frequencies* or color temperature modes**.
- Picture geometry and convergence calibration for each scan rate and
aspect ratio used.
- Lens cleaning.
Two-Piece Projector Advanced Services -
available on an hourly or package quote basis (varies with display
type)†